Pedals & Pedal Assembly VW Bus T1
Exploded view pedal assembly VW Bus T1 up to 07/1967
Click a number to go straight to the matching part.
- Pedal push rod boot
- Seal under brake and clutch pedal (up to 08/1959)
- Brake and clutch pedal pad
- Pedal bushing kit
- Clutch cable clip
- Pedal shaft mounting kit
- Brake pedal return spring
- Brake pedal pivot pin
- Throttle cable lever
- Retaining spring
- Throttle pedal (LHD)
- Throttle push rod gaiter
- Throttle pedal pivot pin
- Throttle pedal floor mount
- Throttle pedal spring
- Brake pedal push rod
- Throttle push rod
- Brake and clutch pedal shaft
- Clutch pedal (LHD)
- Brake pedal (LHD)
- Front clutch cable lever
Pedals & Pedal Assembly VW Bus T1
Worn pedals and bushings cause a spongy brake and clutch on the VW Bus T1. Here you will find throttle, brake and clutch pedals plus the complete pedal assembly.
What you will find here
- Throttle, brake and clutch pedals
- Pedal pads with and without logo
- Bushing kits, pedal shaft and mounting kit
- Springs, push rods and pins
- Seals, gaiter and stop rubber
Tip
When removing the pedals, replace the bushings and the seals under the pedals at the same time – it saves a second removal.
All other cables, pedals and levers can be found in the overview Cables & Levers VW Bus T1.
1 to 27 (from a total of 27)
FAQ
How can I tell worn pedal bushings?
The pedals have side play, squeak or stick when returning.
Do the pedals fit left- and right-hand drive?
Brake and clutch pedals are for left-hand drive; the throttle pedal has separate versions – see the item description.
