Werkzeug / Schrauben Befestigungen und hilfreiche Tools Rund um den VW Käfer und Bus Motor Tools

Tools-vw-käfer

Werkzeug / Schrauben Befestigungen und hilfreiche Tools Rund um den VW Käfer und Bus Motor Tools

Piston ring compressor 83–87 mm for VW Type 1 engine
NEW

Ring compressor for pistons with 83–87 mm diameter – safely compresses the piston rings during installation.

16,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Oil pressure relief piston puller for VW Type 1 engine
NEW

Puller for the oil pressure relief piston in the crankcase of the VW Type 1 engine.

45,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Drilling jig crankshaft/flywheel for VW Type 1 engine
NEW

Drilling jig for precise holes in the crankshaft and flywheel of the VW Type 1 engine.

67,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Seal installer for drive gear seal VW Type 1 engine
NEW

Installer for the seal at the drive gear of the VW Type 1 engine.

76,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Spark plug thread tap M14 × 1.25
NEW

Tap for repairing damaged M14 × 1.25 spark plug threads in the cylinder head.

58,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Spark plug thread inserts, set of 4
NEW

Set of 4 thread inserts for repairing stripped spark plug threads.

11,95 EUR
incl. 19% tax excl. Shipping costs
SET:
 
Lifter clips for VW Type 1 engine
NEW

Clips that hold the lifters in their bores when assembling the crankcase.

10,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Special socket for oil filler neck VW Type 1 engine
NEW

Special socket for loosening and tightening at the oil filler neck of the VW Type 1 engine.

20,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Carburettor synchroniser
NEW

Synchroniser for balancing twin carburettor set-ups on air-cooled VW engines.

14,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Piston ring compressor 88–94 mm for VW Type 1 engine
NEW

Piston ring compressor for pistons from 88 to 94 mm – ideal for big-bore engines.

17,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Pulley puller for VW Type 1 engine
NEW

Puller for the crankshaft pulley of the VW Type 1 engine.

18,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Clutch adjusting wrench for VW Beetle & Bus
NEW

Adjusting wrench for setting the clutch cable at the gearbox.

10,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Deck height measuring plate for VW Type 1 engine
NEW

Measuring plate for determining the deck height when building Type 1 engines.

45,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Valve guide drill 8 mm for VW cylinder heads
NEW

Drill for finishing valve guides for 8 mm valve stems.

90,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Engine stand for air-cooled VW engines
NEW

Engine stand for assembling and overhauling air-cooled VW engines.

288,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Feeler gauge set 26 pieces mm/inch
NEW

Feeler gauge set with 26 blades in mm and inch – for valve clearance and contact points.

8,95 EUR
incl. 19% tax excl. Shipping costs
SET:
 
Triple square socket for drive shaft bolts
NEW

Triple square socket for the bolts of drive shafts with CV joints.

4,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Hex socket for gearbox oil plugs
NEW

Hex socket for the filler and drain plugs of the gearbox.

8,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Starter bush puller 12V for VW Beetle & Bus
NEW

Puller for the starter bush in the gearbox housing – for 12-volt vehicles.

112,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Riveting tool for the workshop
NEW

Handy riveting tool for riveting work during repair and restoration.

35,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Brake bleeding aid
NEW

Bleeding aid that lets you bleed the brake system on your own.

26,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Special wrench for oil filler neck VW Type 1 engine
NEW

Special wrench for loosening and tightening at the oil filler neck of the VW Type 1 engine.

45,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Professional carburettor synchroniser with two adapters
NEW

Professional synchroniser with two adapters for balancing twin carburettor set-ups.

49,95 EUR
incl. 19% tax excl. Shipping costs
SET:
 
Crankshaft end play tool for VW Type 1 engine
NEW

Measuring tool for checking the crankshaft end play on VW Type 1 engines.

18,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
1 to 30 (from a total of 80)
Werkzeug / Schrauben Befestigungen und hilfreiche Tools Rund um den VW Käfer und Bus Motor Tools