Heater Cables & Controls VW Bus T1
Heater Cables & Controls VW Bus T1
Without working heater cables the VW Bus T1 stays cold – or the heater cannot be switched off. Here you will find heater cables in the correct lengths, the mountings at the heat exchangers and the controls in the cab.
What you will find here
- Heater cables for buses with and without walk-through
- Heater cable mounting kits at the heat exchanger
- Heat exchanger levers left and right
- Control levers and knobs for air box and distribution flap
Tip
Buses with walk-through need a longer heater cable (5750 mm). The mountings at the heat exchanger are often seized – best replace them at the same time.
All other cables, pedals and levers can be found in the overview Cables & Levers VW Bus T1.
1 to 14 (from a total of 14)
FAQ
Which heater cable fits my Bus T1?
Without walk-through 211 711 629 B, with walk-through the longer version 211 711 629 C.
Why does my bus not get warm?
Often the heater cable is broken or seized so that the flaps on the heat exchangers do not open.