Piston Rings VW Bus T1
Overview piston rings Type 1 engine
Find your ring set by piston diameter and ring heights – click the item number to go straight to the product.
| Piston Ø | Ring heights | Item no. |
|---|---|---|
| 25/30 hp | ||
| 75 mm | 3 / 3 / 5 mm | B1710 |
| Type 1 engine 1200–2387 cc | ||
| 77 mm | 2 / 2 / 4 mm | J8110300310-1706 |
| 77 mm | 2.5 / 2.5 / 4 mm | J8110300210-1705-1705 |
| 77.5 mm | 2 / 2 / 4 mm | BT1706-01 |
| 77.5 mm | 2.5 / 2.5 / 4 mm | BT1705-01 |
| 78 mm | 2 / 2 / 4 mm | BT1706-02 |
| 78 mm | 2.5 / 2.5 / 4 mm | BT1705-02 |
| 83 mm | 1.5 / 1.5 / 4 mm | BT1707 |
| 83 mm | 2 / 2 / 4 mm | J8110300416 |
| 85.5 mm | 1.75 / 2 / 5 mm | BT1709 |
| 85.5 mm | 2 / 2 / 5 mm | J8110300510-1708 |
| 86 mm | 2 / 2 / 5 mm | J8110300710 |
| 86.5 mm | 2 / 2 / 5 mm | BT1708-02 |
| 87 mm | 1.5 / 1.5 / 5 mm | BT1709-01 |
| 87 mm | 2 / 2 / 5 mm | J8110301418 |
| 88 mm | 1.5 / 1.5 / 5 mm | BT1709-03 |
| 88 mm | 2 / 2 / 5 mm | BT1709-04 |
| 90 mm | 2 / 2 / 4 mm | BT1709-05 |
| 90.5 mm | 1.5 / 2 / 4 mm | J8110301718-01858 |
| 90.5 mm | 2 / 2 / 4.75 mm | 31119816991 |
| 92 mm | 1.5 / 2 / 4 mm | J8110301618 |
| 92 mm | 2 / 2 / 4 mm | BT1709-08 |
| 94 mm | 1.5 / 2 / 4 mm | J8110301018 |
| 94 mm | 2 / 2 / 4 mm | BT1709-11 |
Piston Rings VW Bus T1
Worn piston rings show up as blue smoke, high oil consumption and low compression. Here you will find complete ring sets for the Type 1 engine of your VW Bus T1 – from the 25 hp engine to big bore kits.
What you will find here
- Piston rings for 25/30 hp (75 mm)
- Stock sizes 77, 83 and 85.5 mm plus oversizes 77.5, 78, 86 and 86.5 mm
- Slip-in and big bore 87 to 94 mm
- Different ring heights – matching your piston
Tip
What matters is the piston diameter and ring heights (e.g. 2/2/5 mm). Measure your piston grooves first – the table above shows all sizes at a glance.
All parts for pistons and cylinders are in the overview Pistons & Cylinders VW Bus T1.
Frequently asked questions
How do I find the right ring set?
You need the piston diameter and the height of the three ring grooves (e.g. 2/2/5 mm). Both are in the table above.
Is one set enough for the whole engine?
Yes, one ring set contains the rings for all four pistons.