Cylinder Shims VW Bus T1
Overview cylinder shims Type 1 engine
Find the right shim by cylinder base diameter and thickness – click the item number to go straight to the product.
| Cylinder base Ø | Thickness (inch) | Thickness (mm) | Item no. |
|---|---|---|---|
| 30 hp | |||
| 82 mm | 0.015" | 0.381 mm | BT3005-010 |
| 82 mm | 0.020" | 0.508 mm | BT3005-020 |
| 82 mm | 0.040" | 1.016 mm | BT3005-040 |
| 82 mm | 0.060" | 1.524 mm | BT3005-060 |
| Type 1 engine | |||
| 87 mm | 0.020" | 0.508 mm | BT3006-020 |
| 87 mm | 0.040" | 1.016 mm | BT3006-040 |
| 87 mm | 0.060" | 1.524 mm | BT3006-060 |
| 90 mm | 0.010" | 0.254 mm | J8112004318-03010 |
| 90 mm | 0.020" | 0.508 mm | J8112004618-03011 |
| 90 mm | 0.030" | 0.762 mm | J8112004518 |
| 90 mm | 0.040" | 1.016 mm | 03013-21-6040-0 |
| 90 mm | 0.060" | 1.524 mm | J8112004218 |
| 90 mm | 0.090" | 2.286 mm | J8112005318 |
| 96 mm | 0.010" | 0.254 mm | J8112003618*3030 |
| 96 mm | 0.020" | 0.508 mm | J8112004018-3031 |
| 96 mm | 0.030" | 0.762 mm | J8112003918-3032 |
| 96 mm | 0.040" | 1.016 mm | J8112003518*3033 |
| 96 mm | 0.060" | 1.524 mm | J8112003418 |
| 96 mm | 0.090" | 2.286 mm | J8112003818-3035 |
| 97 mm | 0.010" | 0.254 mm | J8112004918 |
| 97 mm | 0.020" | 0.508 mm | J8112005018 |
| 97 mm | 0.030" | 0.762 mm | J8112005418 |
| 97 mm | 0.040" | 1.016 mm | J8112004818-3043 |
| 97 mm | 0.060" | 1.524 mm | J8112005218 |
| 97 mm | 0.090" | 2.286 mm | J8112005618 |
Cylinder Shims VW Bus T1
With cylinder shims you set the cylinder height and thus the compression of the Type 1 engine in your VW Bus T1. They sit under the cylinder base and matter most on big bore and stroker builds.
What you will find here
- Shims 82 mm for 30 hp
- 87 and 90 mm for stock and slip-in cylinders
- 96 and 97 mm for big bore cylinders
- Thicknesses from 0.010" to 0.180" (approx. 0.25 to 4.6 mm)
Tip
The diameter depends on the cylinder base, not the bore. The table above shows all diameters and thicknesses in inches and millimetres.
All parts for pistons and cylinders are in the overview Pistons & Cylinders VW Bus T1.
Frequently asked questions
Why do I need cylinder shims?
They raise the cylinder and lower compression – needed if compression is too high after a build or to set the deck height.
Which diameter fits?
It depends on the cylinder base diameter: 90 mm for most stock and slip-in cylinders, 96 or 97 mm for big bore.