Front Axle & Steering VW Bus T3

Exploded view of the front axle VW Bus T3 (05/1979–07/1992) – click a number to go straight to the matching part. More parts that are not included in the drawing can be found in the product list below.

  1. Self-locking nut upper control arm bolt
  2. Washer upper control arm bolt
  3. Upper control arm bush
  4. Eccentric washer upper control arm 4 mm
  5. Eccentric washer upper control arm 5.5 mm
  6. Upper control arm bolt
  7. Upper ball joint · Meyle HD
  8. Shock absorber dust cap
  9. Stabiliser bush inner 19 mm
  10. Stabiliser clamp from 08/1984
  11. Stabiliser bush inner 21 mm
  12. Stabiliser clamp up to 07/1984
  13. Stabiliser link bush 23 mm
  14. Stabiliser link bush 19 mm
  15. Stabiliser link bush 21 mm
  16. Stabiliser link straight from 08/1984 · alternative
  17. Stabiliser link curved up to 07/1984
  18. Washer stabiliser link up to 07/1984
  19. Damping ring stabiliser link up to 07/1984
  20. Lower control arm bush
  21. Lower control arm bolt
  22. Spacer stabiliser link
  23. Plate stabiliser link from 08/1984
  24. Damping ring stabiliser link from 08/1984
  25. Spring washer lower control arm bolt
  26. Self-locking nut tension strut
  27. Spacer tension strut bush
  28. Tension strut bush front
  29. Tension strut bush rear
  30. Lower ball joint · Meyle HD
  31. Hub nut (wheel bearing adjustment)
  32. Tension strut

Front Axle & Steering for Your VW Bus T3

The front axle of your VW Bus T3 (1979–1992) carries a lot of weight. Bushes, ball joints and tension strut rubbers therefore wear over the years – the bus clunks, wanders on the straight or the steering feels vague. Here you will find the parts to get the front axle and steering back in shape.

Above you can see the exploded view of the front axle: click a number to go straight to the matching part.

What you will find here

  • Control arms & bushes: control arms, upper and lower bushes, bolts, eccentric washers, washers and nuts
  • Ball joints: upper and lower, also in Meyle HD quality
  • Tension struts & stabiliser: tension struts, strut bushes, stabiliser bushes, clamps, links and fitting kits
  • Suspension: shock absorbers, coil springs, bump stops and protective tubes
  • Wheel bearings & hubs: wheel bearing kits, seals, hub nuts and hub caps
  • Steering: steering boxes, tie rods and tie rod ends, axial joints, flex discs, intermediate shaft, power steering parts and steering wheels

Up to 07/1984 or from 08/1984?

Check the year for the stabiliser: up to 07/1984 the T3 has a curved stabiliser link, from 08/1984 a straight one with different rubbers and plates. The clamps for the stabiliser bushes differ as well. Choose the bushes to match your stabiliser diameter (19, 21 or 23 mm).

Tip

Ideally replace bushes and joints on both sides at the same time and have the alignment checked afterwards. Always renew self-locking nuts. You will find matching parts in Brakes & Wheels VW Bus T3 and Rear Axle & Drive Shafts VW Bus T3.

Coil spring, front for VW Bus T3 (1979–1992) – ref. 251411105A
NEW

Coil spring, front – fits VW Bus T3 (T25) 1.6–2.1 (incl. diesel): 05/1979–07/1992. Ref. 251411105A.

33,80 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Steering coupler, Heavy Duty quality, red polyurethane for VW Bus T3 / Beetle / Karmann Ghia (1979–1992) – ref. AC419000
NEW

Steering coupler, Heavy Duty quality, red polyurethane – fits VW Bus T3 (T25) 1.6–2.1 (incl. diesel): 05/1979–07/1992, Porsche 356 A/B 1.5–1.6 l: 01/1955–12/1963 etc. Ref. AC419000.

17,30 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Protection sleeve for shock absorber, front for VW Bus T3 / Beetle (1979–1992) – ref. 113412305
NEW

Protection sleeve for shock absorber, front – fits VW Bus T3 (T25) 1.6–2.1 (incl. diesel): 05/1979–07/1992, VW Beetle 1302/03 1.2–1.6 l: 08/1969–04/1979. Ref. 113412305.

4,40 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Covering cap for shock absorber nut, upper for VW Bus T3 (1979–1992) – ref. 251413437
NEW

Covering cap for shock absorber nut, upper – fits VW Bus T3 (T25) 1.6–2.1 (incl. diesel): 05/1979–07/1992. Ref. 251413437.

1,92 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Bearing bush for steering column for VW Bus T3 (1979–1992) – ref. 251419579B
NEW

Bearing bush for steering column – fits VW Bus T3 (T25) 1.6–2.1 (incl. diesel): 05/1979–07/1992. Ref. 251419579B.

13,90 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Bracket for power steering fluid tank for VW Bus T3 (1982–1992) – ref. 251422493
NEW

Bracket for power steering fluid tank – fits VW Bus T3 (T25) 1.9–2.1 l: 08/1982–07/1992. Ref. 251422493.

67,50 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Threaded plate for subframe, front for VW Bus T3 (1984–1992) – ref. 251703787
NEW

Threaded plate for subframe, front – fits VW Bus T3 (T25) Syncro 1.6–2.1 (incl. diesel): 11/1984–07/1992. Ref. 251703787.

35,90 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Eccentric washer upper control arm 5.5 mm – VW Bus T3 – ref. 251407133C
NEW

Eccentric washer upper control arm 5.5 mm for VW Bus T3; replaces 251 407 133 C.

4,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Washer upper control arm bolt – VW Bus T3 – ref. 251407089A
NEW

Washer upper control arm bolt for VW Bus T3; replaces 251 407 089 A.

5,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Washer stabiliser link – VW Bus T3 (05/1979–07/1984) – ref. 251411043
NEW

Washer stabiliser link for VW Bus T3 05/1979–07/1984; replaces 251 411 043.

2,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Self-locking nut upper control arm bolt – VW Bus T3 – ref. N0221414
NEW

Self-locking nut upper control arm bolt for VW Bus T3; replaces N 022 141 4.

1,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Self-locking nut tension strut – VW Bus T3 – ref. N90349801
NEW

Self-locking nut tension strut for VW Bus T3; replaces N 903 498 01.

1,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Spring washer lower control arm bolt – VW Bus T3 – ref. N0122323
NEW

Spring washer lower control arm bolt for VW Bus T3; replaces N 012 232 3.

0,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Reparatursatz-Schaltung-VW-Bus-T3
29,90 EUR
incl. 19% tax excl. Shipping costs
SET:
 
Radlager-vorne-VW-Bus-T2-84
21,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Radlager-vorne-VW-Bus-T2
26,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Servolenkung-VW-Bus-T3-251422061
419,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
rep satz front axle 21 mm stabi
29,49 EUR
incl. 19% tax excl. Shipping costs
SET:
 
rep satz front axle 23 mm stabi m stabi
29,99 EUR
incl. 19% tax excl. Shipping costs
SET:
 
rep satz front axle 21 mm stabi
NEW
24,95 EUR
incl. 19% tax excl. Shipping costs
SET:
 
1 to 30 (from a total of 109)

Frequently Asked Questions about the VW Bus T3 Front Axle

How do I recognise worn bushes or ball joints?

Typical signs are clunking over bumps, wandering on the straight, uneven tyre wear and a bus that pulls to one side under braking. With the vehicle raised, check whether the control arms, tension strut or joints have play and whether the rubbers are cracked.

Do I need an alignment after replacing parts?

Yes. After replacing control arm bushes, ball joints, tension struts or tie rods you should have camber, caster and toe adjusted. On the T3, camber and caster are set using the eccentric washers on the upper control arm.