Steering arm conversion kit for lowered vehicles (pair)
On heavily lowered vehicles the tie rods can hit the underside of the fuel tank. With these bushes – cylindrical outside, tapered inside – the tie rod ends are mounted from below. The bushes are pressed into the drilled-out holes of the steering arm.
Your benefits
- Prevents contact between tie rods and tank
- Tie rod ends mounted from below
- For heavily lowered vehicles
Technical data
- Position: steering arm / tie rod ends
- Instructions: English
- Contents: 1 pair
Fits
- VW Beetle and Karmann Ghia (lowered)
- VW Type 3, Type 4 and 181
- VW Bus T1, T2 and T3
Tip
Drilling the steering arm should be done by a specialist workshop – make sure the bushes sit firmly.
Note: Modifications to the steering may require approval – check with your inspection authority beforehand.