Porsche 911 Suspension & Torsion Bars – Early 911, G-Series, 964 & 993

Porsche 911 Suspension & Torsion Bars

Porsche 911 Suspension & Torsion Bars

The classic 911 uses torsion bars instead of coil springs. Here you'll find suspension parts to get your 911 firmly planted on the road again.

What you'll find here

  • Front and rear shock absorbers
  • Torsion bars, spring plates and adjusters
  • Anti-roll bars and bushings
  • Strut mounts and bump stops
  • Suspension bushings and polyurethane mounts

Fits

Porsche 911 early models (1963–1973), G-series (1974–1989) and 964 / 993 (1988–1998) – the exact model years and engines covered are listed in each product description.

Good to know

Always replace shocks in axle pairs. After work on torsion bars, have ride height and alignment set.

Connecting link for stabilizer rear left for Porsche 911 (1977–1989) – ref. 93033307100
Connecting link for stabilizer rear left for Porsche 911 (1977–1989) – ref. 93033307100

Connecting link for stabilizer rear left – fits Porsche 911 3.0–3.3 l: 08/1977–07/1989. Ref. 93033307100.

27,99 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Connecting link for stabilizer rear right for Porsche 911 (1977–1989) – ref. 93033307200
Connecting link for stabilizer rear right for Porsche 911 (1977–1989) – ref. 93033307200

Connecting link for stabilizer rear right – fits Porsche 911 3.0–3.3 l: 08/1977–07/1989. Ref. 93033307200.

24,99 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Rubber sleeve set for torsion bar outer 2 pieces for Porsche 911 (1968–1989) – ref. 91133300900
Rubber sleeve set for torsion bar outer 2 pieces for Porsche 911 (1968–1989) – ref. 91133300900

Rubber sleeve set for torsion bar outer 2 pieces – fits Porsche 911 2.0–3.3 l: 08/1968–07/1989. Ref. 91133300900.

17,85 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
End bushing for torsion bar left/right for Porsche 911 (1963–1989) – ref. 591053-1
End bushing for torsion bar left/right for Porsche 911 (1963–1989) – ref. 591053-1

End bushing for torsion bar left/right – fits Porsche 911 2.0–3.2 l: 01/1963–07/1989. Ref. 591053-1.

113,05 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Long positioning pin for front axle standard models (2 pcs for Porsche 911 (1963–1989) – ref. 591034-9
Long positioning pin for front axle standard models (2 pcs for Porsche 911 (1963–1989) – ref. 591034-9

Long positioning pin for front axle standard models (2 pcs – fits Porsche 911 2.0–3.2 l: 01/1963–07/1989. Ref. 591034-9.

52,36 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Short positioning pin for front axle turbo models 2 pcs for Porsche 911 Turbo (1975–1989) – ref. 591334-9
Short positioning pin for front axle turbo models 2 pcs for Porsche 911 Turbo (1975–1989) – ref. 591334-9

Short positioning pin for front axle turbo models 2 pcs – fits Porsche 911 Turbo 3.0–3.3 l: 01/1975–07/1989. Ref. 591334-9.

48,79 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Grommet for stabilizer front Ø20 mm 4 pieces needed per car for Porsche 911 (1973–1985) – ref. 91134379203
Grommet for stabilizer front Ø20 mm 4 pieces needed per car for Porsche 911 (1973–1985) – ref. 91134379203

Grommet for stabilizer front Ø20 mm 4 pieces needed per car – fits Porsche 911 2.7–3.2 l: 07/1973–07/1985. Ref. 91134379203.

3,57 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Grommet for stabilizer rear Ø18 mm for Porsche 911 (1973–1977) – ref. 91133379302
Grommet for stabilizer rear Ø18 mm for Porsche 911 (1973–1977) – ref. 91133379302

Grommet for stabilizer rear Ø18 mm – fits Porsche 911 2.7–3.0 l: 08/1973–07/1977. Ref. 91133379302.

7,14 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Torsion bar cover electro galvanized for Porsche 911 / 912 (1963–1989) – ref. 90133315300
Torsion bar cover electro galvanized for Porsche 911 / 912 (1963–1989) – ref. 90133315300

Torsion bar cover electro galvanized – fits Porsche 911 2.0–3.3 l: 01/1963–07/1989, Porsche 912 1.6 l: 01/1965–02/1970. Ref. 90133315300.

29,75 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Grommet-for-stabilizer-rear-Ø18-mm-2-pieces-needed-per-car-Porsche 911-477411313B
Grommet for stabilizer rear Ø18 mm 2 pieces needed per car Porsche 911 3.0-3.3,2.5-3.0,3.0-3.3,3.3-3.6,3.6-3.8 Porsche ref no. 477411313B
7,14 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Rubber sleeve for torsion bar outer for Porsche 911 / 912 (1963–1970) – ref. 90133319500
Rubber sleeve for torsion bar outer for Porsche 911 / 912 (1963–1970) – ref. 90133319500

Rubber sleeve for torsion bar outer – fits Porsche 911 2.0 l: 01/1963–07/1967, Porsche 912 1.6 l: 01/1965–02/1970. Ref. 90133319500.

10,71 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Control arm bushing for inner trailing arm for Porsche 911 / 912 (1963–1989) – ref. 90133105900
Control arm bushing for inner trailing arm for Porsche 911 / 912 (1963–1989) – ref. 90133105900

Control arm bushing for inner trailing arm – fits Porsche 911 2.0–3.3 l: 01/1963–07/1989, Porsche 912 1.6 l: 01/1965–02/1970. Ref. 90133105900.

27,37 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Suspension-strut-support-bearing-front-left/right-Porsche 911-91134101800
Suspension strut support bearing front left/right Porsche 911 2.0-3.3,1.7-2.0 Porsche ref no. 91134101800
116,62 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Grommet for stabilizer rear Ø15 mm 4 pieces needed per car for Porsche 911 / 912 (1965–1973) – ref. 90133379302
Grommet for stabilizer rear Ø15 mm 4 pieces needed per car for Porsche 911 / 912 (1965–1973) – ref. 90133379302

Grommet for stabilizer rear Ø15 mm 4 pieces needed per car – fits Porsche 911 2.0–2.7 l: 08/1967–07/1973, Porsche 912 1.6 l: 01/1965–02/1970. Ref. 90133379302.

7,14 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Protective bracket for wishbone front for Porsche 911 (1967–1989) – ref. 90134115900
Protective bracket for wishbone front for Porsche 911 (1967–1989) – ref. 90134115900

Protective bracket for wishbone front – fits Porsche 911 2.0–2.4 l: 08/1967–07/1973, Porsche 911 2.7–3.3 l: 08/1973–07/1989. Ref. 90134115900.

14,28 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Grommet for stabilizer front Ø22 mm 4 pieces needed per car for Porsche 911 (1983–1989) – ref. 91134388100
Grommet for stabilizer front Ø22 mm 4 pieces needed per car for Porsche 911 (1983–1989) – ref. 91134388100

Grommet for stabilizer front Ø22 mm 4 pieces needed per car – fits Porsche 911 3.2–3.3 l: 08/1983–07/1989. Ref. 91134388100.

3,57 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Rear axle support left/right for Porsche 911 (1968–1989) – ref. 91133300900
Rear axle support left/right for Porsche 911 (1968–1989) – ref. 91133300900

Rear axle support left/right – fits Porsche 911 2.0–3.3 l: 08/1968–07/1989. Ref. 91133300900.

172,55 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Grommet for stabilizer front Ø16 mm 4 pieces needed per car for Porsche 911 (1973–1977) – ref. 91134379202
Grommet for stabilizer front Ø16 mm 4 pieces needed per car for Porsche 911 (1973–1977) – ref. 91134379202

Grommet for stabilizer front Ø16 mm 4 pieces needed per car – fits Porsche 911 2 l: 08/1973–07/1977. Ref. 91134379202.

3,57 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Wishbone new front left for Porsche 911 (not Turbo) (1973–1989) – ref. 91134190101
Wishbone new front left for Porsche 911 (not Turbo) (1973–1989) – ref. 91134190101

Wishbone new front left – fits Porsche 911 (not Turbo) 2.7–3.2 l: 08/1973–07/1989. Ref. 91134190101.

248,71 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Connecting link for stabilizer with grommet front for Porsche 911 / 912 (1963–1977) – ref. 90134307603
Connecting link for stabilizer with grommet front for Porsche 911 / 912 (1963–1977) – ref. 90134307603

Connecting link for stabilizer with grommet front – fits Porsche 911 2.0–2.7 l: 01/1963–07/1973, Porsche 911 Turbo 3.0 l: 01/1975–12/1977 etc.. Ref. 90134307603.

34,51 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Torsion bar cover metal/rubber outer left/right one side only for Porsche 911 / 912 (1963–1989) – ref. 90150407900
Torsion bar cover metal/rubber outer left/right one side only for Porsche 911 / 912 (1963–1989) – ref. 90150407900

Torsion bar cover metal/rubber outer left/right one side only – fits Porsche 911 2.0–3.3 l: 01/1963–07/1989, Porsche 912 1.6 l: 01/1965–02/1970. Ref. 90150407900.

22,61 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Wishbone new front right for Porsche 911 S/T/E (1968–1973) – ref. 91134190200
Wishbone new front right for Porsche 911 S/T/E (1968–1973) – ref. 91134190200

Wishbone new front right – fits Porsche 911 S/T/E 2.0–2.4 l: 08/1968–07/1973. Ref. 91134190200.

248,71 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Seal for torsion bar cover left/right one side only for Porsche 911 / 912 (1963–1985) – ref. 90150475901
Seal for torsion bar cover left/right one side only for Porsche 911 / 912 (1963–1985) – ref. 90150475901

Seal for torsion bar cover left/right one side only – fits Porsche 911 2.0–3.3 l: 01/1963–07/1985, Porsche 912 1.6 l: 01/1965–02/1970. Ref. 90150475901.

2,38 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Wishbone new front right for Porsche 911 (not Turbo) (1973–1989) – ref. 91134190201
Wishbone new front right for Porsche 911 (not Turbo) (1973–1989) – ref. 91134190201

Wishbone new front right – fits Porsche 911 (not Turbo) 2.7–3.2 l: 08/1973–07/1989. Ref. 91134190201.

248,71 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Grommet-for-stabilizer-front-Ø15-mm-2-pieces-needed-per-car-Porsche 911-90134379202
Grommet for stabilizer front Ø15 mm 2 pieces needed per car Porsche 911 2.0,2.2-2.7,1.7-2.0 Porsche ref no. 90134379202
5,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Wishbone new front left for Porsche 911 S/T/E (1968–1973) – ref. 91134190100
Wishbone new front left for Porsche 911 S/T/E (1968–1973) – ref. 91134190100

Wishbone new front left – fits Porsche 911 S/T/E 2.0–2.4 l: 08/1968–07/1973. Ref. 91134190100.

248,71 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Metal-spacer-tube-for-connecting-link-stabilizer-front-4-pieces-needed-per-car-Porsche 911-90134373700
Metal spacer tube for connecting link stabilizer front 4 pieces needed per car Porsche 911 2.0-2.4,1.6,1.7-2.0 Porsche ref no. 90134373700
5,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Seal-for-steering-rack-cover-plate-Porsche 911-90134116501
Seal for steering rack cover plate Porsche 911 2.0-2.4,1.6,1.7-2.0 Porsche ref no. 90134116501
21,42 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Control arm bushing set front 4 pcs for Porsche 911 (not Turbo) (1968–1989) – ref. 90134142102
Control arm bushing set front 4 pcs for Porsche 911 (not Turbo) (1968–1989) – ref. 90134142102

Control arm bushing set front 4 pcs – fits Porsche 911 (not Turbo) 2.0–3.2 l: 08/1968–07/1989. Ref. 90134142102.

77,35 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Suspension strut support bearing front for Porsche 911 (1963–1968) – ref. 90134101801
Suspension strut support bearing front for Porsche 911 (1963–1968) – ref. 90134101801

Suspension strut support bearing front – fits Porsche 911 2 l: 01/1963–07/1968. Ref. 90134101801.

130,90 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
31 to 60 (from a total of 96)