Oil pressure switch
Crankcase cover with strainer, gaskets and magnetic drain plug
at each maintenance is necessary to make the oil filter clean or replace. Many type 1 and type 3 engines have no drain plug so the oil must be drained by turning, which without a mess of it is almost impossible the lid. This complete set is equipped with a crankcase cover with drain plug so that the draining of the oil can be carried out. In a clean way Also, this plug has a magnet which ensures that any filings not with the oil can be pumped through the engine and this can cause enormous damage. The drain plug is very convenient to drain the oil, but no reason not to make the filter clean or keep that in your mind. If the drain plug is not the reason to buy a new crankcase cover on it is because the original is pulled crooked and not seal properly in that way. These sets are supplied with crankcase cover, drain plug, gaskets, cap nuts and oil screen with choice of black crankcase cover and drain plug as the original case or a chrome crankcase cover with drain plug for those who want to leave. This detail is not neutral If you do not need a complete set, then all parts also available separately which are listed in the chart below (click on the order of a single image, and any additional information). beware : it often happens that the wrong set is ordered, check First what type of engine you have with possibly the year (motor) before you order, which again saves time and effort to send it back. the
Sump plate kit with magnetic drain plug black
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login
.png "021919081B")
.png "021919081B")
