Pistons & Cylinders VW Bus T1
Pistons & Cylinders VW Bus T1
Pistons and cylinders are the heart of the Type 1 engine in your VW Bus T1. They determine compression, power and oil consumption – and whether your bus still pulls strongly uphill. Here you will find everything for an engine rebuild: from the original 30 hp kit to big bore kits with more than two litres.
What you will find here
- Piston & cylinder kits – stock 1200 to 1600 cc, slip-in 87/88 mm and big bore up to 94 mm, cast or forged
- Engine kits with cylinder heads – pistons, cylinders and heads matched in one package
- Piston rings – ring sets from 75 to 94 mm with an overview table by diameter and ring heights
- Cylinder shims – to set compression, 82 to 97 mm in many thicknesses, with overview table
Which displacement fits?
Depending on the year, the T1 had engines with 25 to 44 hp and 75 to 83 mm bore. Many buses now run a 1600 (85.5 mm). Slip-in kits with 87 or 88 mm fit without machining the case; from 90.5 mm the case and cylinder heads must be machined.
Tip
Always order piston rings and cylinder shims to match the piston diameter – the tables in the subcategories help you. Cylinder heads are in Cylinder Heads, Rocker Arms & Valves VW Bus T1.
Frequently asked questions
How do I recognise worn pistons and cylinders?
Typical signs are blue smoke, high oil consumption, low compression and a clear loss of power. A compression test quickly shows whether a rebuild is needed.
Can I replace just the piston rings?
Only if the cylinders are still within tolerance and not worn. With worn bores, a complete piston and cylinder kit is the better choice.