Intake Manifolds & Boots VW Bus T1

Intake Manifolds & Boots VW Bus T1

Intake Manifolds & Boots VW Bus T1

The intake manifold connects the carburettor to the cylinder heads. Cracked boots or leaking gaskets draw extra air – the engine of your VW Bus T1 then runs lean and rough and can be damaged.

What you will find here

  • Intake manifolds for single carbs (25, 31 and 34 mm)
  • End castings and intake pipes for twin carbs
  • Boots, clamps and end pieces
  • Insulating flanges, gaskets and preheat covers

Tip

The manifold must match the carburettor (25, 31 or 34 mm flange). Always replace boots and gaskets when changing the carburettor.

All parts for carburettors and fuel supply can be found in the overview Carburettors & Fuel Pumps VW Bus T1.

Shield-plate-on-double-preheating-pipe-rear-left-VW-Kaefer-113119579A
23,18 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Heat-riser-insulation-kit-VW-Kaefer-AC119588
9,52 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Intake-manifold-with-dual-port-30/31/34-PICT-VW-Käfer-17-2805-0
159,28 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Intake-manifold-end-set-single-port-aluminium-with-clamps-and-boots-VW-Käfer-00-3237-0
129,19 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Intake-manifold-set-with-dual-port-casted-original-style-without-gaskets-left/right-VW-Käfer-AC129150
86,87 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Intake-manifold-25-mm-base-VW-Käfer-111129701K
169,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Intake-manifold-end-set-dual-port-casted-original-style-with-clamps-and-boots-VW-Käfer-00-3238-0
149,28 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Intake-manifold-set-single-port-with-gaskets-and-mounting--For-EPC-34-or-ICT-VW-Käfer-43-5205-0
207,06 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Intake-manifold-25-mm-base-VW-Käfer-111129701E
199,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Intake-manifold-set-Shorty-8-for-IDA-carburetors-Jaycee-VW-Käfer-JC-4369-0
467,67 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Intake-manifold-set-with-ball-burnished-finish-dual-port-with-gaskets-and-mounting--For-EPC-34-or-ICT-VW-Käfer-43-5206-0
135,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Intake-manifold-end-set-dual-port-aluminium-with-clamps-and-boots-VW-Käfer-00-3236-0
149,80 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Intake-manifold-set-single-port-HPMX-or-IDF-VW-Käfer-43-5208-0
248,71 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Intake-manifold-set-dual-port-with-crossover-hose-fittings-gaskets-and-hardware-VW-Käfer-43-4412-0
134,47 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Intake-manifold-25-mm-base-VW-Käfer-111129701
157,08 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Intake-manifold-end-set-tall-dual-port-34-EPC/ICT-VW-Käfer-43-5216-0
207,06 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Manifold-boot-for-air-intake-VW-Käfer-113129729B
1,90 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Manifold-boot-kit-for-air-intake-with-clamps-silicone-red-VW-Käfer-AC129151
10,71 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Manifold-boot-kit-for-air-intake-with-clamps-silicone-black-VW-Käfer-AC129152
9,90 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Manifold-boot-for-air-intake-silicone-red-heavy-duty-VW-Käfer-113129729B
4,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Manifold-boot-for-air-intake-urethane-VW-Käfer-00-3403-B
4,76 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Split-manifold-boot-set-with-clamps-for-air-intake-2-pieces-VW-Käfer-00-9960-0
16,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Manifold-boot-and-gasket-set-for-air-intake-red-2-pieces--For-dual-port-VW-Käfer-00-3230-0
13,09 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
31 to 60 (from a total of 63)

Frequently asked questions

How do I find an air leak at the manifold?

The engine idles roughly or hunts. Spray a little brake cleaner on boots and gaskets with the engine running – if the speed changes, there is a leak.

Which manifold do I need?

It depends on the carburettor: 28/30 PICT have a smaller flange than the 34 PICT. With twin carbs you need matching manifolds for single or dual port heads.